How to Epoxy garage

Epoxy garage flooring transforms concrete into a durable, chemical-resistant surface that's easy to clean and looks professional.

1. Prepare the concrete surface. Clean the garage floor thoroughly with degreaser and scrub away oil stains. Etch the concrete with muriatic acid solution or use a concrete grinder to create texture for better adhesion. Vacuum all dust and debris, then let the floor dry completely for 24 hours.
2. Fill cracks and repair damage. Mix concrete crack filler or epoxy putty according to package directions. Fill any cracks, holes, or damaged areas flush with the surface. Allow repairs to cure completely before proceeding.
3. Mask and protect surrounding areas. Apply painter's tape along walls, door frames, and any areas you don't want coated. Lay plastic sheeting over stored items and ensure good ventilation by opening garage doors and using fans.
4. Mix the epoxy coating. Open both parts of the epoxy kit and pour Part B into Part A. Mix thoroughly with a paint mixer attachment on a drill for 3-4 minutes until completely blended. Work quickly as you'll have about 45 minutes of working time.
5. Apply the primer coat. Pour mixed epoxy into paint tray and use a 9-inch roller with 3/8-inch nap sleeve to apply thin, even coats. Start at the back of the garage and work toward the door. Maintain a wet edge and avoid puddles.
6. Add decorative flakes. While the epoxy is still wet, broadcast colored flakes evenly across the surface by tossing them upward and letting them fall naturally. Cover about 85-90% of the surface for full coverage look.
7. Apply topcoat and cure. After 12-24 hours, lightly sand any rough spots and vacuum. Apply the clear topcoat using the same rolling technique. Allow to cure for 72 hours before driving on it, though you can walk on it after 24 hours.